Page 1 of 1

Backlot jump help

Posted: May 23rd, 2009, 11:10 am
by Talz
Hey guys I have a problem. i wanted to ask you guys if this jump was possible, heres the screenshot.
http://img37.imageshack.us/img37/4067/shot0212.jpg

You see, from the peg of the first balcony I'm supposed to just jump onto the balcony ledge, but I can't do that because I have a crappy computer and I can't use the 250 and 333 jumps. I can use the 125 jump but it's not high enough. An RPG jump works but I have to save it for another jump. So my only choice is to jump onto that second peg of another balcony and back onto the first balcony. But I don't know if it's possible or not. Please can someone try it and tell me?

Also, if there is ANY OTHER WAY to get onto that balcony, please tell me?

I'm desperate :cry:

Re: Backlot jump help

Posted: May 23rd, 2009, 12:15 pm
by helium
Hey Talz, welcome to the CJ forum :)

As for the jump, I just tried it is possible with 125, 250 and 333. I'll post a demo with the easiest way to do it :)

There are probably other ways of getting up, but I would think this is the fastest and easiest way.

Be sure to check the demo if you have problems doing the jump :)

Re: Backlot jump help

Posted: May 23rd, 2009, 1:18 pm
by Talz
Thanks helium. :wink:
Atleast now I know that it's possible. Going to try it right away.

Re: Backlot jump help

Posted: May 23rd, 2009, 4:28 pm
by BlueDamselfly
good luck ;)

Re: Backlot jump help

Posted: May 23rd, 2009, 6:23 pm
by Talz
Helium, are you doing something special? :?
You first lean right and then jump, something like that. I can't do it :x

Re: Backlot jump help

Posted: May 23rd, 2009, 8:55 pm
by helium
I lean right to make sure that I'm on the very edge of the peg. Make sure you go as far out on the peg as you can, and as far right as possible. Then just make a simple jump (with sprint) to jump to the other peg. Look closely at my demo and you'll see what I mean :)