Trying to get our server get a work...

Talk about anything related with the servers

Moderator: Core Staff

Post Reply
SOME RANDOM

Trying to get our server get a work...

Post by SOME RANDOM » August 5th, 2006, 6:44 am

how do i get my own server to work and put the save position mod on. For some reason it doesn't work. Is there something that i have to alter.

9mm
CJ Donator
CJ Donator
Posts: 183
Joined: February 14th, 2006, 10:57 pm
Location: USA

Post by 9mm » August 6th, 2006, 12:02 am

well first off is this for cod 1 or 2?

also plz try to give a bit more info about what you have tried and what your problem is....

to get the save mod to work you will need to have it in your "main" folder and also have the correct settings in your dedicated config that the server runs from to activate the save mod and configure it to run properly

finally plz also take the time to register so it will make helping you easier

creator
CJ Worshipper
CJ Worshipper
Posts: 492
Joined: July 6th, 2006, 11:37 pm
Location: The Netherlands
Contact:

Post by creator » August 6th, 2006, 2:54 am

if its cod1
make a folder called:
akk_mod
put in it the akk files
and made in ur server shortcut ( or script that auto execute when server loads up )
set fs_Game akk_mod
it should be on ur server

for cod2 well same but akk mod doesnt work on cod2 so use codjumper mod
i think its same way as akk mod
just change folder to codjumper_mod or something and put the mods in it and do
+set fs_game codjumper_mod in ur shortcut line
or in script : set fs_game codjumper_mod
:D
Cod 1 Mapper&Modder&Moddeler

9mm
CJ Donator
CJ Donator
Posts: 183
Joined: February 14th, 2006, 10:57 pm
Location: USA

Post by 9mm » August 7th, 2006, 5:47 am

for cod 1 that will not work(or at least I dont think so)

you need to put the file in the main folder then set up the cfg

there are about 15 commands that need to be set for the mod to work so you will need to put then into the dedicated cfg that will be executed

creator
CJ Worshipper
CJ Worshipper
Posts: 492
Joined: July 6th, 2006, 11:37 pm
Location: The Netherlands
Contact:

Post by creator » August 7th, 2006, 1:58 pm

put the file in main and u get errors or it will just lag
what i said above is the good way used by everyone that knows how a server/mod realy works
i made my self for 2-3 years servers.
Cod 1 Mapper&Modder&Moddeler

creator
CJ Worshipper
CJ Worshipper
Posts: 492
Joined: July 6th, 2006, 11:37 pm
Location: The Netherlands
Contact:

Post by creator » August 7th, 2006, 6:33 pm

commands:

set g_gametype "codjumper"
set scr_antiblocktime "15" // This is the amount of time it takes until a player (not moving) is marked as blocking.
set scr_saveposition "1" // This will turn on the savemod
set scr_antikill "1" // This will turn on invulnerability. This will stop all killing (except if person is blocking).
set scr_cjvote "1" // This will turn on the CJ voting system
set scr_cjvotetime "10" // This is the time (in minutes) before voting is automatically turned on.
set g_weaponAmmoPools "0"

hope its helping u.
good luck with ur server
let me know if u got anymore trouble
Cod 1 Mapper&Modder&Moddeler

User avatar
Drofder2004
Core Staff
Core Staff
Posts: 13315
Joined: April 13th, 2005, 8:22 pm
Location: UK, London

Post by Drofder2004 » August 7th, 2006, 8:22 pm

The CoDJumper Mod comes with a FULL readme, it contains a full server config and set up details, plus information on what every new cvar does.
Image
Virgin Media 20Mb Broadband:
"Perfect for families going online at the same time, downloading movies, online gaming and more."
Borked internet since: 22-07-2010

creator
CJ Worshipper
CJ Worshipper
Posts: 492
Joined: July 6th, 2006, 11:37 pm
Location: The Netherlands
Contact:

Post by creator » August 7th, 2006, 8:23 pm

yup
just wanted to tell him quick ;)
Cod 1 Mapper&Modder&Moddeler

Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests