how do I change my FPS?
Moderator: Core Staff
-
- CJ Wannabe
- Posts: 17
- Joined: April 25th, 2011, 9:33 am
- Gamertag: I x UnLuCkY
how do I change my FPS?
hey guys I keep seeing videos saying 125 fps ETC and I have noticed alot of bounces you can't do in normal fps so can someone explain how I change the FPS?
Re: how do I change my FPS?
Start with first pressing the key left of the 1/! that is ~. That should open your console, if that doesn't work go to multiplayer options--> console enable and make that yes. If you did that, open your console and typ /cg_drawfps 1 and press enter. When you have done that you can see your fps in the right upper corner. After that you need to open your console again and that typ /com_maxfps 125 that will do that your maxfps is now always 125. It is also possible to switch fps/bind them but for that search on the forum there are many topics about. (i hope everything i wrote is correct beccause i haven't used these cmds for a while
-
- CJ Wannabe
- Posts: 17
- Joined: April 25th, 2011, 9:33 am
- Gamertag: I x UnLuCkY
Re: how do I change my FPS?
so what does the fps do? does it make me jump further or what? also when I do cg_drawFPS 1 but it my fps only shows around 30 to 60... should I try to overclock my gfx card and cpu?Badeendnl wrote:Start with first pressing the key left of the 1/! that is ~. That should open your console, if that doesn't work go to multiplayer options--> console enable and make that yes. If you did that, open your console and typ /cg_drawfps 1 and press enter. When you have done that you can see your fps in the right upper corner. After that you need to open your console again and that typ /com_maxfps 125 that will do that your maxfps is now always 125. It is also possible to switch fps/bind them but for that search on the forum there are many topics about. (i hope everything i wrote is correct beccause i haven't used these cmds for a while
Re: how do I change my FPS?
With certain sort fps you can jump further/higher/better for bouncing. but setting maxfps isn't enough, your computer also need to reach that fps. To get better fps you can use a program: yitch, search on google for it and you will find it. What you also could do is pressing ingame b+2 and turns all graphixs down. For the overclocking part, you can do it but i wouldn't do it if i hadn't got the knowlegde for it. By overclocking wrong/to much you have a change to screw whole your system up.
-
- CJ Wannabe
- Posts: 17
- Joined: April 25th, 2011, 9:33 am
- Gamertag: I x UnLuCkY
Re: how do I change my FPS?
do you mean yitch as in the yitch3 configuration?Badeendnl wrote:With certain sort fps you can jump further/higher/better for bouncing. but setting maxfps isn't enough, your computer also need to reach that fps. To get better fps you can use a program: yitch, search on google for it and you will find it. What you also could do is pressing ingame b+2 and turns all graphixs down. For the overclocking part, you can do it but i wouldn't do it if i hadn't got the knowlegde for it. By overclocking wrong/to much you have a change to screw whole your system up.
Re: how do I change my FPS?
yes that is what i mean
Re: how do I change my FPS?
If you're reaching 30 fps your PC is shit.
-=[[CoDJumper.com Movies]]=-
[[Ambush]] || [[Backlot]] || [[Bloc]] || [[Bog]] || [[Broadcast]] || [[Chinatown]] || [[Countdown]]
[[Crash]] || [[Creek]] || [[Crossfire]] || [[District]] || [[Downpour]] || [[Killhouse]] || [[Overgrown]]
[[Pipeline]] || [[Shipment & Wetwork]] || [[Showdown]] || [[Strike]] || [[Vacant]]
A woman can fake an orgasm, but a man can fake an entire relationship
[[Ambush]] || [[Backlot]] || [[Bloc]] || [[Bog]] || [[Broadcast]] || [[Chinatown]] || [[Countdown]]
[[Crash]] || [[Creek]] || [[Crossfire]] || [[District]] || [[Downpour]] || [[Killhouse]] || [[Overgrown]]
[[Pipeline]] || [[Shipment & Wetwork]] || [[Showdown]] || [[Strike]] || [[Vacant]]
A woman can fake an orgasm, but a man can fake an entire relationship
Re: how do I change my FPS?
Here are some console commands that may bring your fps up:
/r_fullbright 1
/r_drawdecals 0
/r_drawsun 0
/r_drawwater 0
/r_detail 0
/fx_enable 0
/r_fog 0
And I'm not sure if lower ping = higher fps but I'll put it in anyways:
/cl_maxpackets 100
And here are fps binds:
/bind *key* toggle com_maxfps *number* *number*
Hope these help, I also have ele binds, and many other binds if you need them to
/r_fullbright 1
/r_drawdecals 0
/r_drawsun 0
/r_drawwater 0
/r_detail 0
/fx_enable 0
/r_fog 0
And I'm not sure if lower ping = higher fps but I'll put it in anyways:
/cl_maxpackets 100
And here are fps binds:
/bind *key* toggle com_maxfps *number* *number*
Hope these help, I also have ele binds, and many other binds if you need them to

-
- CJ Worshipper
- Posts: 289
- Joined: December 5th, 2009, 7:12 am
- Location: Australia
Re: how do I change my FPS?
These are cheat protected (except for r_drawDecals and possibly r_detail) commands and can't be used in public servers without devmap enabled. However, in the codjumper mod, there is a menu allowing you to toggle these commands, which allows your FPS to greatly increase. Without this, many people couldn't get the FPS required to do some jumps. In a public server NOT running the codjumper mod, the best you can do is use a specific config to increase your FPS, such as yitch3, and you said earlier.$hadow wrote:/r_fullbright 1
/r_drawdecals 0
/r_drawsun 0
/r_drawwater 0
/r_detail 0
/fx_enable 0
/r_fog 0
Changing your FPS uses the command 'com_maxfps' which takes a value between 1 and 1000.
-
- CJ Wannabe
- Posts: 17
- Joined: April 25th, 2011, 9:33 am
- Gamertag: I x UnLuCkY
Re: how do I change my FPS?
well when I check like a system scanner to see if my pc can run cod4 it says it passes the highest settings... i also changed the settings on cod4 using the codjumper mod and my fps is now at around 80-90 is there anything else I can use to boost my fps up?
-
- CJ Worshipper
- Posts: 289
- Joined: December 5th, 2009, 7:12 am
- Location: Australia
Re: how do I change my FPS?
If you have used the yitch3 configuration and have put fullbright on, fx off, and decals off, and are still only getting 80-90, then you will need to upgrade your PC. Also, 85 is the default FPS, so make sure you've changed it with the '/com_maxfps *value*' command. If you wanted 125 fps, type /com_maxfps 125 into the console and hit 'enter'.kingXrated wrote:my fps is now at around 80-90
-
- Core Staff
- Posts: 14220
- Joined: October 21st, 2004, 7:17 pm
- Location: Holland
- Contact:
Re: how do I change my FPS?
There's also a specific option which caps FPS at 60 or so by default. I'm not sure how it's named but that needs to be switched.
matt101harris wrote:big cock was the first thing that came to my head lol
-
- CJ Worshipper
- Posts: 289
- Joined: December 5th, 2009, 7:12 am
- Location: Australia
Re: how do I change my FPS?
Ah, that's "Sync Every Frame", and yeh, that needs to be turned off for more FPS.[SoE]_Zaitsev wrote:There's also a specific option which caps FPS at 60 or so by default. I'm not sure how it's named but that needs to be switched.
-
- Core Staff
- Posts: 14220
- Joined: October 21st, 2004, 7:17 pm
- Location: Holland
- Contact:
Re: how do I change my FPS?
Thanks. That's it. Try that option and then come back to us
If you've done that and you still lack FPS (On lowest settings) then it's 99% certain that your PC needs upgrades.

matt101harris wrote:big cock was the first thing that came to my head lol
Re: how do I change my FPS?
Post your PC specs.
Who is online
Users browsing this forum: Ahrefs [Bot] and 4 guests